FANUC ALM共82篇
This section mainly introduces the alarms and detailed descriptions of each FANUC system. Through this section, you can find common alarm solutions.
Fanuc alarm: 0 - PLEASE TURN OFF POWER-FANUC CNC

Fanuc alarm: 0 – PLEASE TURN OFF POWER

Fanuc alarm: 0 - PLEASE TURN OFF POWER CNC Machine Control Manufacturer:Fanuc Control Model:16/18/21, 16i/18i/21i, 160i/180i/210i, 0/00/0-mate, 0i 0 - PLEASE TURN OFF POWER Alarm...
share5的头像-FANUC CNC钻石会员share53个月前
013814
FANUC SP9006 THERMAL SENSOR DISCONNECT-FANUC CNC

FANUC SP9006 THERMAL SENSOR DISCONNECT

FANUC SP9006 Reason for alarm An abnormality in the temperature sensor inside the spindle motor or a disconnection of the temperature sensor cable was detected. FANUC SP9006 troubl...
share5的头像-FANUC CNC钻石会员share52个月前
011910
FANUC system spindle SP9031 alarm solution-FANUC CNC

FANUC system spindle SP9031 alarm solution

Today, a friend in the QQ CNC group encountered an alarm when the spindle rotated above 3000 rpm. It was normal when the spindle rotated below 3000 rpm. The picture of the alarm is...
share5的头像-FANUC CNC钻石会员share52个月前
01168
FANUC system black screen alarm ALM_197 alarm solution-FANUC CNC

FANUC system black screen alarm ALM_197 alarm solution

The FANUC system screen is divided into two types, one is the black screen screen, and the other is the operation screen we enter normally. When the system detects that it cannot m...
share5的头像-FANUC CNC钻石会员share51个月前
01095
FANUC SV5136 alarm maintenance summary-FANUC CNC

FANUC SV5136 alarm maintenance summary

FANUC SV5136 alarm: Cause and treatment: Compared with the number of controlled axes, the number of servo amplifiers recognized by FSSB is insufficient. 1.FSSB setting screen After...
share5的头像-FANUC CNC钻石会员share51个月前
09013
Fanuc alarm: PS015 -TOO MANY SIMULTANEOUS AXES-FANUC CNC

Fanuc alarm: PS015 -TOO MANY SIMULTANEOUS AXES

Fanuc alarm: PS015 -TOO MANY SIMULTANEOUS AXES CNC Machine Control Manufacturer:Fanuc Control Model:, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS015 -TOO MANY SIMU...
Fanuc alarm: PS061 -P OR Q COMMAND IS NOT IN THE MULTIPLE REPETIVE CYCLES BLOCK-FANUC CNC

Fanuc alarm: PS061 -P OR Q COMMAND IS NOT IN THE MULTIPLE REPETIVE CYCLES BLOCK

Fanuc alarm: PS061 -P OR Q COMMAND IS NOT IN THE MULTIPLE REPETIVE CYCLES BLOCK CNC Machine Control Manufacturer:Fanuc Control Model:, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS ...
share5的头像-FANUC CNC钻石会员share52个月前
8315
FANUC SP9018 SUMCHECK ERROR PROGRAM ROM-FANUC CNC

FANUC SP9018 SUMCHECK ERROR PROGRAM ROM

Amplifier alarm number: 18 FANUC SP9018 Reason for the alarm: The spindle amplifier data ROM component is abnormal. Troubleshooting ideas:Replace the Spindle Amplifier (SP) control...
share5的头像-FANUC CNC钻石会员share51个月前
0805
FANUC SP9032 SIC-LSI RAM FAULT-FANUC CNC

FANUC SP9032 SIC-LSI RAM FAULT

Amplifier alarm number: 32 Replace the Spindle Amplifier(SP) control printed circuit board FANUC SP9032 Description The FANUC SP9032 SIC-LSI RAM FAULT alarm usually indicates that ...
share5的头像-FANUC CNC钻石会员share532天前
0797