Fanuc alarm: PS050 -CHF/CNR NOT ALLOWED IN THRD BLK CNC Machine Control Manufacturer：Fanuc Control Model：, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS050 -CHF/CNR ...

Fanuc alarm: PS011 -FEED ZERO ( COMMAND ) CNC Machine Control Manufacturer：Fanuc Control Model：, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS011 -FEED ZERO ( COMMAN...

FANUC SP9010  Reason for alarm A drop in the input power supply voltage of the spindle amplifier was detected. FANUC SP9010 troubleshooting Check whether the jumper cable (CXA2A-...

Fanuc alarm: PS051 -MISSING MOVE AFTER CNR/CHF CNC Machine Control Manufacturer：Fanuc Control Model：, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS051 -MISSING MOVE ...

Fanuc alarm: PS057 -NO SOLUTION OF BLOCK END CNC Machine Control Manufacturer：Fanuc Control Model：, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS057 -NO SOLUTION OF ...

FANUC SP9006 Reason for alarm An abnormality in the temperature sensor inside the spindle motor or a disconnection of the temperature sensor cable was detected. FANUC SP9006 troubl...

Fanuc alarm: PS054 -NO TAPER ALLOWED AFTER CHF/CNR CNC Machine Control Manufacturer：Fanuc Control Model：, 16i/18i/21i, 0i-A 0i-B 0I-D 0I-F 0I-F PLUS Fanuc alarm: PS054 -NO TAPER ...

Amplifier alarm number: 18 FANUC SP9018 Reason for the alarm: The spindle amplifier data ROM component is abnormal. Troubleshooting ideas:Replace the Spindle Amplifier (SP) control...

cause of issue An abnormal load was detected on the servo motor, Cs axis, or spindle positioning axis. troubleshooting Check the load of the axis during movement; Confirm whether t...